DIA-BRIGHT # 806, special chemical polisher for aluminum, is developed by the urgent request of the industries concerning the surface treatment of aluminum without adding nitric acid (HNO) absolutely. And it is an epochal polisher solving the pollution problem of working condition due to gas and the treatment is simple just by supplementing it to the original solution and it does not need special technology.

DIA-SD-TREATMENT solution is used for a simple chemical treatment such as dipping comparable to the mechanical treatment (sand blast) requiring a lot of cost. It is possible to obtain the brilliant surface by eliminating the roller trace, die mark and small groove of the surface for one time, as compared with the process to treat chemically after treating with sandblast.

DIA COLD #500 is the most improved sealing agent which carries out the final sealing treatment at low temperature for all the anodized coating. In order to seal the fine foam of the hexagonal cell which is derived by the anodizing treatment the past technology is usually dependent on formation of the boiled water and the relation of metal-salt.

For anodizing, plating, and etching process, there are lots of demands for various design patterns and for example, patterning characters or figures on the surface of double plating are increasing. So the customers need to use more high performance resist ink than ever. MAR 705 was designed to give excellent adhesion property and easy removable property together.

AL COLOUR-W INK is used for color print anodizing process by two steps of anodizing and printing. Until now, with conventional water based dyes, it has needed masking and more than two times of coating to get multi-color layers. With AL COLOUR-W INK process, anodizers can do coloring only printed areas by using screen printing technique over unsealed aluminum surface by only onetime printing (or coating).

AVAILABLE COLOURS

BLACK, YELLOW, RED, BLUE, GREEN, BROWN, VIOLET

AL Pastel MWC is a white matt finishing agent for aluminum and aluminum alloys. It is totally different from old alkaline etching and it gives very good surface touch feeling with beautiful milky-white appearance by white matt finish of aluminum and aluminum alloy surfaces. AL Pastel MWC will add additional values to various aluminum products at low cost.